1/100th Little Joe II Builders Kit

Description

The Boyce Aerospace Hobbies 1/100th Little Joe II Builders Kit is a flying replica of the Nasa Little Joe II test vehicle that was used to flight test the Apollo capsule's design and flight charachteristics
This stunning rocket measures 10.5" in length and weighs a mere 2.1 ounces
Our replica features a DLSA 3D-printed Apollo boilerplate capsule and tower, a FDM-printed airframe with fins, correugation and body conduits, glue-on RCS nossles, screw-on motor retainer, display engine nozzles, highly-detailed cut decals and illustrated instructions
Single 18mm rocket motor recommended
Soars to an impressive 850 feet on a C6-5 engine
Requires additional parts: (1) 65mm long BT-20 motor tube, (1) 15" chute, assorted spray paint, super glue, filler primer and 220 grit wet/dry sandpaper
Includes step-by-step
The Boyce Aerospace Hobbies 1/100th Little Joe II Builers Kit is a flying replica of the Nasa Little Joe II. The kit, when complete, stands 10.5" tall and makes a fine display piece when not intended for impressive heights. Its total weight is a mere 2.1 ounces and when flown on a C6-5 engine, it can reach 850 feet during flight and then returns to earth on a 15" chute (not included). Each kit features a DLSA 3D-printed Apollo boilerplate capsule and tower, a FDM-printed airframe with fins, correugation and body conduits, glue-on RCS nossles, screw-on motor retainer, display engine nozzles and highly-detailed cut decals. Additional parts and supplies required. Complete your 1:100 scale series from Boyce Aerospace Hobbies or display with the Estes Saturn V.
Boyce Aerospace Hobbies recommends hobbyists under the age of 13 be supervised by an adult at all times.