DPS-1200FB PCIe Power Supply Adapter Breakout Board Adapter For ETH ZEC HAM

Description

Don't be taken by buying a low quality board! This listing is for ONE
NEW
PCIe
Int
erface Board
for any HP Common Slot Power Supply!
We recommend the 'DPS-1200FB A' -OR-
HP 'DPS-1200FB-1 A'
Power Supply
- The HP 'DPS-1200FB-1 A'
is a 94% efficient Common Slot Power Supply!
This is the same board as our DPS-1200 interface board.... just with
8 PCIe
CONNECTORS!!!
SUPER easy to connect - literally just seconds - no more messing around with attaching wires to terminals
!
The Recommendation:
Our customers are encouraged to give us feedback and suggestions for all our products. One customer said he liked the DPS 1200 MEGA board, but wanted to be able to quickly connect/disconnect the board and supply form his equipment. he looked at the DPS1200 GPU board we produce and said it was perfect except he had no need for the 12v monitoring, or 12V remote-on features. Again, they didn't need anything fancy - just something simple and, since he uses a lot of these, something cheap... It just needed an on/off switch, some indicators, and reliable operation.
Our SOLUTION:
Yep - another
BUTT SIMPLE IDEA
- build a super duper easy connect
interface board
for any common slot supply like the DPS-1200! When it came to the interface board design, it needed to be low complexity and cost, with high quality, efficiency, and reliability. We also wanted to make the price point of this product lower than any other product we had! And this
BUTT SIMPLE IDEA
had to be something that could be make available to everyone.
This Auction is for the
interface board only
- as seen in the first listing image. All other images are for use and illustration purposes only. You must buy the DPS-1200FB Power Supply (
NOT INCLUDED
), and any cables you need (
NOT INCLUDED
), separately!
About the Power Supply:
The HP "DPS-1200FB A" is a small foot print, high efficiency, 12 Volt Enterprise Server switching power supply (
1.5″ x 7.75″ x 3 1/2″ and weighing in at around two pounds each with a capability to supply 900W (75A at 12V) on 110V. Now THAT’S crazy!)
. It operates on 110 or 220 volts, to provide 900 watts or 1200 Watts respectively. This supply offers a high quality and inexpensive way to power devices requiring 12 volt power such as Bitcoin mining equipment and electronics projects.
This
interface board
is intended for use with HP brand power supplies model number 'DPS-
1200F
B A'.
You can typically buy this supply used for - here on eBay, on Amazon, and from many other sources.
Uses:
- The PCIe connectors make it easy to attach to your project - click - click - done!
- Great as a small footprint general purpose high current fixed +12V supply.
- A great HIGH EFFICIENCY power supply for many Bitcoin Mining rigs! Save about 50% on power supply costs compared to buying a standard ATX power supply.
- Great for +12V or +24V Radio Control and Ham Radio projects, and featured extensively in RC and amateur radio forums.
- Since this is a computer server grade supply, it is great for computer projects.
- It can run power hungry video cards and multiple video card systems.
-
Operates at a typical-load efficiency of 89-92% and the DPS-1200FB-1 A is 94% efficient!! (results may vary)
CAUTION:
Before working with, or attaching wires to, this
interface board
, ensure it is disconnected from the supply. Before attaching the interface board to the supply, make sure the switch is in the OFF position and the supply is disconnected from power (un-plugged). It is important to unplug the supply, then the interface board before working on it to avoid causing a short which could damage the supply or cause injury. The supply and
interface board must be operated on a non-conductive surface
to prevent the possibility of causing a short. Full instructions, warnings, and limitations, are provided with each
interface board
.
Interface Board Specifications
:
T
he terminal blocks used are identical to the ones used on the DPS-1200 MEGA, a tried and true design.
These connectors are standard 6-pin female PCIe connectors that can be found on most motherboards, Power Supplies, or graphics cards. That means you can use a standard 6-pin PCIe male cable to connect to your equipment. We carry these cables, but they can be found many places on the net. All of this was designed for quick connection and disconnection.
The interface board was designed and assembled in the US; and parts were sourced from US suppliers when possible. Each board is tested on a real DPS-1200FB A under full load, for quality control before it is shipped to you. I would expect nothing less, so I give nothing less!
The board has 3 main switches and indicators:
SWITCH 1 -
BUTT SIMPLE:
ON/OFF
Yellow/Amber LED
- STDBY
Green LED
- Power Supply ON
Payment and Shipping:
The buyer should make a Paypal payment within 1 day of purchase. Once a confirmed payment is received, the interface board will be shipped using USPS Priority Mail with tracking. Combined shipping discount is provided for multiple interface boards to be sent to the same location.
We also accept Bitcoin as payment! The final BTC price that includes final value and shipping is based on the Coinbase conversion rate. For Bitcoin payment, the payment must show as pending in my wallet within 2 hours of invoice.
International sales proudly supported via the eBay Global Shipping Program.
Please provide 5 star feedback, and if for any reason you feel we have earned less than 5 stars, allow us a chance to resolve the issue.
If for any reason you are dissatisfied, please contact us immediately.
Please contact me with any questions!!
Official PayPal Conversion Rates
Add
Currency Converter
To Your Items