RF500 100KHZ-500MHZ OLED RF Power Meter V2.0 + PC Software + CNC Case -75～15 dBm

Description

Welcome to my shop
Product Overview
RF500 100KHZ-500MHZ OLED RF Power Meter V2.0 + PC Software + CNC Case -75～15 dBm
Detail
RF-Power500 portable RF power meter.
0.96 inch 128x64 pixel OLED display, powered by micro-USB5V.
Applications:
● Calibration of RF instrumentation equipment;
● detection and maintenance of RF equipment;
Measurement of standing wave ratio of RF circuit (adding feedback bridge);
● Measurement of return loss of RF circuit;
● interference detection between wireless communication devices;
● RSSI (received signal strength indication) and transmit power level detection;
• Performance evaluation of step attenuators;
● Amplifier gain and network attenuation measurement;
• Measurement of forward power and reflected power in the directional coupler;
● GMSK modulation of the GSM signal power measurement *;
The product technical indicators:
1, measuring power range
-75
～
+15 dBm
2, measuring power resolution : <
±
1dBm
3, measuring frequency range 100K ~ 500MHz
4, the input impedance of 50Ω
5, the dynamic range> 60dB
6, the working voltage 5VDC (through micro-USB power supply)
7, operating current <50 mA
8, size 68 * 48 * 18 mm (length X width x height)
How to use:
1. Power supply: Connect the power supply (signal source, computer, charging treasure, etc.) via micro-USB.
2, the power switch: next to the USB, the switch to the left to turn on the power, turn to the right to shut down.
3. Input: Connect RF signal through SMA1 interface, SMA2 is the detection voltage output for secondary development.
4. After powering on, press the “OK S3” button to initialize the power meter.
5. Press the button S1 to change the position of the cursor (shift left)
Press button S5 to change the position of the cursor (shift right)
Press S2 to change the data of the cursor position plus
Press button S4 to change the data of the cursor position minus
After entering the system, the cursor indicates the selected digit. At this time, the up and down buttons can modify the value of the selected digit.
When the cursor is at the last digit (or first digit) of the selected item, press the right button (or left button) to toggle the selected item.
When the parameters are set, press the middle OK button to make the settings take effect.
Note: For details on how to use the power meter to connect the computer to the host computer software, see “How to use the host computer”.
Offset: Provides the offset selection for both "positive" and "negative" symbols.
Here are three common scenarios where preset offsets are required:
1 signal is too large, add attenuator between the signal source and the power meter, the offset is set to the attenuation of the attenuator, the symbol is "positive" 2 signal is too small, add amplifier between the signal source and the power meter, partial
The setting is set to the gain of the amplifier. The symbol “negative” 3 signal has loss (attenuation) between the signal source and the power meter, and the offset is set to the attenuation of the signal, and the sign is “positive”.
Eight, the host computer screenshot:
Package :
100% Brand New
1 x
RF-Power500v2.0 +case
Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback
Shipping Policy
Item Location
Payment Mathord
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
3. Payment must be received 4 days after auction ended.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
About Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.